TotalBoat 5:1 Epoxy Resin Kits (Gallon, Fast Hardener)

3M marine adhesive sealant 5200 tan. The adhesive sealant is extremely strong, retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water. Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Center board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Remains workable with trowel or spatula up to four hours after application. Won't sag or flow in vertical or horizontal seams. Tough/flexible polyurethane polymer. Non-shrinking. One-part moisture cure. Long working time. Application method: hand or pressure caulk. Brand: 3m. Capabilities: sustainability. Color: tan. Consistency: medium paste. Container volume: 0.1 gallon (us). Cure rate: less than 1 mm/24 hr. Elongation: greater than 800 percent. Hardness: 68 shore a. Industry - use: construction, general industrial, marine, specialty vehicle, transportation. Product form: cartridge. Skin time: greater than 48 hour. Solids weight percent (approximate): 95 percent. Tack free time: 48 hour. Tensile strength: 700 psi.

USE WHAT THE PROS USE – Extremely strong adhesive sealant retains strength above or below waterline
BONDS PERMANENTLY – Ideal for sealing, bonding and attaching on the interiors of boats and RVs, or on the exteriors below the waterline and where shielded from the sun
LONG LASTING FORMULA – Tough polyurethane polymer resists weathering and salt water
WON’T CRACK OR PEEL – Stays flexible, retaining strong bonds even during vibration, structural movement or shock
EASY TO APPLY – Adhesive sealant requires no mixing, cures completely in 5-7 days
For industrial/occupational use only. Not for consumer sale or use
USE WHAT THE PROS USE – Extremely strong adhesive sealant retains strength above or below waterline
BONDS PERMANENTLY – Ideal for sealing, bonding and attaching on the interiors of boats and RVs, or on the exteriors below the waterline and where shielded from the sun
LONG LASTING FORMULA – Tough polyurethane polymer resists weathering and salt water
WON’T CRACK OR PEEL – Stays flexible, retaining strong bonds even during vibration, structural movement or shock
EASY TO APPLY – Adhesive sealant requires no mixing, cures completely in 5-7 days
For industrial/occupational use only. Not for consumer sale or use

Top WaffleMaker Reviews

3M Marine Adhesive Sealant 5200 (06501) Permanent Bonding and Sealing for Boats and RVs Above and Below the Waterline Waterproof Repair, Tan, 10 fl oz Cartridge;