Tormek TT-50 Truing and Dressing Tool - Keeps your Stone Round and Flat;
Tormek TT-50 Truing and Dressing Tool - Keeps your Stone Round and Flat

With this unique diamond truing tool, you can true and dress your grindstone exactly round and flat. You can conveniently, and without pressing with your thumbs, feed the diamond cutter across the stone. You achieve an even ...

Buy Now From Amazon

With this unique diamond truing tool, you can true and dress your grindstone exactly round and flat. You can conveniently, and without pressing with your thumbs, feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both your hands. The feed can be made in both directions. Thanks to the controlled feed, you get an even and flat stone surface with no ridges. There is no need to flatten afterwards with. The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves. For use with the Tormek T-8 and T-4 sharpening systems.

  • Trues the Grindstone Exactly Round and Flat
  • Mounts and Locks Easily on the Universal Support
  • Without Pressing with your Thumbs, Feed the Diamond Cutter across the Stone
  • Even and Flat Stone Suface with No Ridges
  • The Slower you Feed, the Finer Surface you'll Achieve
  • Trues the Grindstone Exactly Round and Flat
  • Mounts and Locks Easily on the Universal Support
  • Without Pressing with your Thumbs, Feed the Diamond Cutter across the Stone
  • Even and Flat Stone Suface with No Ridges
  • The Slower you Feed, the Finer Surface you'll Achieve

Similar Products

Tormek TOR-SE77 Advanced Square Edge JigTormek SP-650 Tormek Stone GraderKnife Blade Sharpening Jig Tormek SVM-45. The Knife Jig that Turns Your Tormek Sharpening System T-7, T-4, T-3, etc. into a Professional Knife Sharpener.Honing Compound PA70 for Use with Tormek Sharpening Grinders T-7, T-4, and T-3, and also other leather strops. Creates Razor Sharp Edges on Knives and Tools.Angle Setter for Sharpening System Tormek WM-200 Angle Master. Sets the Perfect Angle for Sharpening Blades. Works on Tormek Sharpening Systems.WEN 4270 10-Inch Two-Direction Water Cooled Wet/Dry Sharpening SystemTormek TOR-SVM00 Small Knife Holder for Use with SVM-45 Knife JigLong Knife Blade Sharpening Jig Tormek SVM-140. The Long Knife Jig That Handles Longer, Thinner Knives and Works With Your Tormek Sharpening System T-7, T-4, T-3, etc.