Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550)For submerged use in parts washers using aqueous solutions or UL-listed solvents. Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Features: Completely submersible Rated for continuous duty 1/4" MNPT discharge Thermal overload protection 1/2" MNPT Master Builders conduit fitting 6´ power cord without plug Nylon pump head Double lip Viton shaft seal Stainless steel motor shaftLittle Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Specifications: Horsepower: 1/40 Flow: 300GPH @ 1' Cord Length: 6' Shut Off: 12. 2' Voltage: 115 Hertz: 60 Amps: . 8 Watts: 47 Weight: 4. 5 lbs. Height: 5. 55" Width: 2. 9" Length: 5. 4"
- OIL-FILLED PARTS WASHER PUMP: For submersible use only in parts washers using aqueous solutions or UL listed solvents (classified as PJQU); with flash point not lower than 100°F
- MATERIALS: glass-filled polyester plate, casing and seal adapter; nylon volute and impeller; stainless steel motor shaft; Viton shaft seal; polyethylene screen; Nitrile volute gasket;
- COMES WITH 6-ft. power cord (plugless), Master Builders conduit fitting at pump housing for mounting, removable filter screen
- MOTOR SPECIFICATIONS: 1/40 HP; 115 Volt; 0.8 running Amps; 47 Watts; thermal overload protected; rated for continuous duty; CSA listed in the USA and Canada
- PUMP SPECIFICATIONS: 300 GPH at 1-ft. lift; maximum 5.3 PSI; 12.2 ft. shutoff; 1/4-inch MNPT discharge; 6-ft. plugless power cord, Master Builders conduit fitting
- OIL-FILLED PARTS WASHER PUMP: For submersible use only in parts washers using aqueous solutions or UL listed solvents (classified as PJQU); with flash point not lower than 100°F
- MATERIALS: glass-filled polyester plate, casing and seal adapter; nylon volute and impeller; stainless steel motor shaft; Viton shaft seal; polyethylene screen; Nitrile volute gasket;
- COMES WITH 6-ft. power cord (plugless), Master Builders conduit fitting at pump housing for mounting, removable filter screen
- MOTOR SPECIFICATIONS: 1/40 HP; 115 Volt; 0.8 running Amps; 47 Watts; thermal overload protected; rated for continuous duty; CSA listed in the USA and Canada
- PUMP SPECIFICATIONS: 300 GPH at 1-ft. lift; maximum 5.3 PSI; 12.2 ft. shutoff; 1/4-inch MNPT discharge; 6-ft. plugless power cord, Master Builders conduit fitting
