Champion Double Platinum Power spark plugs deliver more powerful performance. Featuring exclusive Heat-Active alloy, a platinum fine wire center electrode and a platinum pad ground electrode, spark plugs reach optimal tem...

Buy Now From Amazon

Champion Double Platinum Power spark plugs deliver more powerful performance. Featuring exclusive Heat-Active alloy, a platinum fine wire center electrode and a platinum pad ground electrode, spark plugs reach optimal temperatures quickly and maintain stable operating temperature under all engine loads, while providing maximum life and sharper spark focus.

Step-by-Step Instructions for Installing New Spark Plugs

Step 1
If necessary, set the gap on the new spark plug before installing it. In the past, it was necessary to use a gapping tool to make sure the gap in the spark plugs was the correct size. Today, Champion spark plugs come pre gapped, eliminating the need for this step most times. You should double check that the gap is correctly set; check your owner’s manual to find the distance for the spark plug gap and use a gap gauge or feeler gauge to check the distance.

Step 2
Seat the new spark plug by hand; turning it clockwise at least two full turns. Once you have the spark plug snug, use the socket wrench with extension and spark plug socket to tighten it turning the plug clockwise. The plug’s washer should be pressed against the mounting surface.  
Take care not to over tighten the plug; you can strip the thread on the head of the engine leading to costly repairs. You can also use a torque wrench to torque it to specification (OE service or repair manual).

Step 3
Replace the spark plug wire boot or ignition coil and wiring connector. A plastic boot should click into place while a rubber boot may require a coat of dielectric grease on the inside of the boot for easy removal next time.

Step 4
Repeat the removal and installation process for each spark plug. That’s all there is to it! If at any point you run into issues or have a question, consult your mechanic.

These instructions are for informational purposes only and should not be used in lieu of seeking professional advice from a certified technician. We encourage you to consult with a certified technician if you have specific questions or concerns relating to any of the topics covered herein.



  • Copper Plus - Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Durable: Champion copper plus spark plugs are built to ISO and SAE standards for proven performance; Champion's patented SAC-9 semi-conductor resistor provides maximum EMI and RFI suppression
  • Champion copper plus spark plugs use TinTac and Ultraseal Shells, this eliminates the need for the use of anti-seize compound during installation by providing the best corrosion protection of any spark plug in the industry
  • The Champion copper plus spark plug features a copper core electrode that provides increased conductivity and heat control while delivering good overall wear characteristics
  • Provides longer life; Copper core center electrode allows for accurate control of the plug's heat range, optimizing the plug's performance and adding to the longevity of the spark plug
  • Copper Plus - Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Durable: Champion copper plus spark plugs are built to ISO and SAE standards for proven performance; Champion's patented SAC-9 semi-conductor resistor provides maximum EMI and RFI suppression
  • Champion copper plus spark plugs use TinTac and Ultraseal Shells, this eliminates the need for the use of anti-seize compound during installation by providing the best corrosion protection of any spark plug in the industry
  • The Champion copper plus spark plug features a copper core electrode that provides increased conductivity and heat control while delivering good overall wear characteristics
  • Provides longer life; Copper core center electrode allows for accurate control of the plug's heat range, optimizing the plug's performance and adding to the longevity of the spark plug

Similar Products

Standard Motor Products V377 PCV ValveStandard Motor Products 7884K Spark Plug Wire SetGEARWRENCH 3/8ECCPP Ignition Coils Pack of 8 Compatible with Chrysler 300 Dodge Durango/Magnum/Ram 1500/Ram 2500/Ram 3500 Jeep Grand Cherokee 2003-2005 Replacement for UF378 IC508 C1414Gates 43501 Water PumpFel-Pro VS50625R Valve Cover Gasket Setfaersi Ignition Coil Pack of 8 Replaces # UF504, C1526 for V8 5.7L 6.1L 6.4L - Chrysler 300, Aspen & Dodge Challenger, Charger, Durango, Magnum, Ram & Jeep Commander & More, Years 2005-2016ECCPP Ignition Coils Pack of 8 Compatible with Dodge Ram 1500/Charger/Challenger/Magnum Chrysler 300 Jeep Grand Cherokee/Commander 2005-2011 Replacement for UF-504 C1526