Intertape LA-26 Polyester/Rope-Fiber Laminate Tape combines the moisture, chemical, abrasion and puncture resistance of polyester film with the machine direction strength and dimensional stability of rope-fiber paper backing, this pressure sensitive adhesive is designed for use in high temperature conditions. It is ideal for tabbing, holding and wrapping, masking PCB gold fingers during wave solder and HAL operations. It can also be used for "powder coat" masking. It is also currently being considered as a replacement to Permacel P-99 for ASTM D3359-08 adhesion testing along with a few other tapes.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 55m.
- Intertape LA-26 Polyester/Rope-Fiber Laminate Tape gives you the best of both worlds. It offers the moisture, abrasion, puncture and chemical resistance of polyester film and the dimensional stability plus machine direction strength of rope-fiber paper backing.
- Intertape polyester/rope-fiber tape with pressure-sensitive thermosetting adhesive is designed for high-temperature applications up to 350 degrees Fahrenheit (176 degrees Celsius).
- Product applications include holding, wrapping and tabbing, masking PCB gold fingers during wave solder and HAL operations, powder coat masking, and more.
- Intertape LA 26 is a natural opaque color and wound on a 3 in. diameter core.
- Carrier/Backing: polyester film/robe-fiber flatback. Adhesive: thermosetting rubber. Thickness: 6 mils (carrier, adhesive) 4 mils (carrier). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 45 pounds per inch (longitudinal). Elongation: 2%.
- Intertape LA-26 Polyester/Rope-Fiber Laminate Tape gives you the best of both worlds. It offers the moisture, abrasion, puncture and chemical resistance of polyester film and the dimensional stability plus machine direction strength of rope-fiber paper backing.
- Intertape polyester/rope-fiber tape with pressure-sensitive thermosetting adhesive is designed for high-temperature applications up to 350 degrees Fahrenheit (176 degrees Celsius).
- Product applications include holding, wrapping and tabbing, masking PCB gold fingers during wave solder and HAL operations, powder coat masking, and more.
- Intertape LA 26 is a natural opaque color and wound on a 3 in. diameter core.
- Carrier/Backing: polyester film/robe-fiber flatback. Adhesive: thermosetting rubber. Thickness: 6 mils (carrier, adhesive) 4 mils (carrier). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 45 pounds per inch (longitudinal). Elongation: 2%.
