For Sears 12" Tilting Table Band Saws, Skill 10" HD3640 and Dermal 10" 1120. Contains: 4 guide blocks 3/8" x 3/8" x 3/4".Cool Blocks blade guides are made from a high tech, non-metallic composite material, "Graphite Impregnated Phenolic Laminate" which contains three synthetic dry lubricants that lubricate the blade but do not make it oily. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.
- Cool Blocks Band Saw Blade Guides replace standard metal or plastic guides and enhance cutting performance! They lubricate the band saw blade but do not make it oily. Cool Blocks are made of a non-metallic composite material– Graphite Impregnated Phenolic Laminate with three synthetic dry lubricants. Metal guide blocks create metal to metal contact, causing heat, friction, premature blade wear and breakage. Imitation plastic guides melt and offer no lubrication. Cool Blocks blade guides allow blades to run cooler and last longer with less friction. They improve the cutting performance of any blade width, but are most effective with 1/16″ and 1/8″ wide blades for tight radius work. Cool Blocks Blade Guides fine tune your band saw!
- Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity.
- Item Package Dimension: 5" L x 2.5" W x 1.0" H
- Item Package Weight: 1.0 lb
- CB50000BL For Delta 14″ Band Saws. Contains: 3 guide blocks 1/2″ x 1/2″ x 7/8″ and 1 guide block 1/2″ x 3/8″ x 1-3/4″
- Made in USA
- Cool Blocks Band Saw Blade Guides replace standard metal or plastic guides and enhance cutting performance! They lubricate the band saw blade but do not make it oily. Cool Blocks are made of a non-metallic composite material– Graphite Impregnated Phenolic Laminate with three synthetic dry lubricants. Metal guide blocks create metal to metal contact, causing heat, friction, premature blade wear and breakage. Imitation plastic guides melt and offer no lubrication. Cool Blocks blade guides allow blades to run cooler and last longer with less friction. They improve the cutting performance of any blade width, but are most effective with 1/16″ and 1/8″ wide blades for tight radius work. Cool Blocks Blade Guides fine tune your band saw!
- Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity.
- Item Package Dimension: 5" L x 2.5" W x 1.0" H
- Item Package Weight: 1.0 lb
- CB50000BL For Delta 14″ Band Saws. Contains: 3 guide blocks 1/2″ x 1/2″ x 7/8″ and 1 guide block 1/2″ x 3/8″ x 1-3/4″
- Made in USA
