Little Giant's low level piggyback diaphragm switch converts any manual pump up to 1/3 HP (115V, 10 max. amps) to automatic operation. Includes an 18-foot power cord. Designed to operate in water and sump applications with limited space, the switch can be used either by attaching it to the Little Giant 5-MSP pump or used separately with other pumps to control on-off operation of the pump. The switch is activated by pressure to a diaphragm, caused by rising water around the switch housing. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST.
- APPLICATIONS: converts manual pumps up to 10 Amps (running) and up to 1/3 HP to automatic operation; ideal for utility or flood pumps, hydroponics; CSA listed in the USA; 25-ft. cord
- EASY INSTALLATION: equipped with a piggyback plug for easy installation; plug the pump's plug into the back of the switch plug and plug the switch into the wall outlet
- LOW LEVEL SWITCH: ideal for utility pumps and hydroponic operations as pump will shut off when water reaches approximately 1 inch; 3.031 inches x 1.7 inches x 4.75 inches high
- ON/OFF LEVEL: Pump activates when water reaches 2.5 inches and shuts off when water falls to 1-inch; override automatic operation by plugging pump directly to wall outlet
- SPECIFICATIONS: 25-foot power cord; 115-Volt; Maximum 10 Amps (Running), 1/3 HP; CSA listed in the USA; 3.031 inches x 1.7 inches x 4.75 inches high
- APPLICATIONS: converts manual pumps up to 10 Amps (running) and up to 1/3 HP to automatic operation; ideal for utility or flood pumps, hydroponics; CSA listed in the USA; 25-ft. cord
- EASY INSTALLATION: equipped with a piggyback plug for easy installation; plug the pump's plug into the back of the switch plug and plug the switch into the wall outlet
- LOW LEVEL SWITCH: ideal for utility pumps and hydroponic operations as pump will shut off when water reaches approximately 1 inch; 3.031 inches x 1.7 inches x 4.75 inches high
- ON/OFF LEVEL: Pump activates when water reaches 2.5 inches and shuts off when water falls to 1-inch; override automatic operation by plugging pump directly to wall outlet
- SPECIFICATIONS: 25-foot power cord; 115-Volt; Maximum 10 Amps (Running), 1/3 HP; CSA listed in the USA; 3.031 inches x 1.7 inches x 4.75 inches high
