- ONE LIGHT CLIP FOR EVERY TWO FEET OF LIGHTS: One package of the Command Clear Outdoor Light Clips includes 20 clear hooks and 24 small water-resistant Command Strips; use one light clip for every two feet of lights
- DAMAGE FREE HANGING: Water- and UV-resistant, these outdoor clips hold strongly through rain, snow, sleet and heat to let you hang outdoor lights on a variety of smooth indoor or outdoor surfaces without tools
- WORKS ON A VARIETY OF SMOOTH OUTDOOR SURFACES: Outdoor string lights bond to doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows
- TACKLE INDOORS AND OUTDOORS: Resists UV rays, sunlight and moisture so you can use it as an indoor or outdoor tape
- SUSTAINABILITY: Solvent-free painting tape made from 50% renewable resources with a core made from 70% post-consumer waste
- HOW TO USE: Let the firmly applied adhesive tape set for 30 to 60 minutes before you begin painting, and then lift up slowly to remove tape at a 45-degree angle for damage-free surfaces
- EASY REMOVAL: Lift Scotch Painter’s Tape up slowly and pull it back on itself, then remove the tape at a 45-degree angle
- No. 1 TRUSTED: Scotch is the No. 1 trusted brand for tape by professional painters (Based on 2020 TNS Kantar U.S. Brand Health Survey)
- APPLICATION TIPS: For great paint results make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting
- REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle
- ONE LIGHT CLIP FOR EVERY TWO FEET OF LIGHTS: One package of the Command Clear Outdoor Light Clips includes 20 clear hooks and 24 small water-resistant Command Strips; use one light clip for every two feet of lights
- DAMAGE FREE HANGING: Water- and UV-resistant, these outdoor clips hold strongly through rain, snow, sleet and heat to let you hang outdoor lights on a variety of smooth indoor or outdoor surfaces without tools
- WORKS ON A VARIETY OF SMOOTH OUTDOOR SURFACES: Outdoor string lights bond to doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows
- TACKLE INDOORS AND OUTDOORS: Resists UV rays, sunlight and moisture so you can use it as an indoor or outdoor tape
- SUSTAINABILITY: Solvent-free painting tape made from 50% renewable resources with a core made from 70% post-consumer waste
- HOW TO USE: Let the firmly applied adhesive tape set for 30 to 60 minutes before you begin painting, and then lift up slowly to remove tape at a 45-degree angle for damage-free surfaces
- EASY REMOVAL: Lift Scotch Painter’s Tape up slowly and pull it back on itself, then remove the tape at a 45-degree angle
- No. 1 TRUSTED: Scotch is the No. 1 trusted brand for tape by professional painters (Based on 2020 TNS Kantar U.S. Brand Health Survey)
- APPLICATION TIPS: For great paint results make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting
- REMOVAL TIPS: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle