RC Missile Warship Radio Remote Control HT-2877 RTR Ship Battleship Cruiser
- Factory Assembled
- Fully Directional, forward / backward / left / right
- Full Function Radio Controlled
- Easy To Be Controlled
- Battery: 6V 500mA
- Length 50cm x Width 13cm x Height 16cm
- Ready to Run
- Factory assembled and painted, Ready to Run, Color may vary
- Speed: 5-10 mph, Aerodynamic ABS plastic body, Glossy exterior paint, Detailed Deck Superstructure
- Full Function FM Radio Control Boat (forward, left/right turning, backward); Perfect for pools, small ponds, rivers and lakes.1. place boat into water before it can operate. 2. make sure battery is fully charge 3-4hour before using.
- The humidity will damage the circuit broad and motor. There is a drain plug on the deck . After playing the boat, please unplug the drain plug and turn out the water inside; also please remove the battery, cabin cover, and dry out the water. The instruction is printed on the box.
- "Touch water to run" safety function. The propellers will run when it touches the water. Also, it could be tested by touch switch on the land . The touch switch can be connected by wet fingers or metal wire as paper clip to test. Its instruction is printed on the box.
- Factory assembled and painted, Ready to Run, Color may vary
- Speed: 5-10 mph, Aerodynamic ABS plastic body, Glossy exterior paint, Detailed Deck Superstructure
- Full Function FM Radio Control Boat (forward, left/right turning, backward); Perfect for pools, small ponds, rivers and lakes.1. place boat into water before it can operate. 2. make sure battery is fully charge 3-4hour before using.
- The humidity will damage the circuit broad and motor. There is a drain plug on the deck . After playing the boat, please unplug the drain plug and turn out the water inside; also please remove the battery, cabin cover, and dry out the water. The instruction is printed on the box.
- "Touch water to run" safety function. The propellers will run when it touches the water. Also, it could be tested by touch switch on the land . The touch switch can be connected by wet fingers or metal wire as paper clip to test. Its instruction is printed on the box.
