Air King's BFQ90 from the Air King BFQ High Performance Exhaust Fan Fan series features an unique Snap-In Installation System. The included bracket nails or screws to the ceiling joist allowing the fan Housing to "Snap-In...

Buy Now From Amazon

Air King's BFQ90 from the Air King BFQ High Performance Exhaust Fan Fan series features an unique Snap-In Installation System. The included bracket nails or screws to the ceiling joist allowing the fan Housing to "Snap-In". Connect the wiring and the ducting, install the easy fitting grill and you are done. The durable high impact plast housing ensures quiet operation and maximum performance. High performance and attractive stylized grill make the High Performance Exhaust Fan Series right for the job. UL Listed for installation over a tub or shower on a GFCI circuit using 4" round ducting. Motor is HVI certified. Wire nuts and Romex connector are included. 90 CFM at .1SP. Operates at 2.5 Sones (Sones is a broader measure of sound than decibels.) Exhaust capacity 90 - 115 sq. ft. Fan housing dimensions is 8.68 x 9.125 x 4.75 in inches



  • Size: 90 CFM.White, polymeric grill measures 10" x 10", with durable high-impact plastic housing for quiet operation and enhanced performance
  • Operates at 90 CFM at 2.5 scones
  • Features a special snap-in installation system for easy in-ceiling installation
  • Comes with 4" plastic duct collar with back draft damper for quiet operation and draft protection
  • Can handle continuous operation, is rated for ceilings insulated to R-40, Culus-listed, HVI 2100-certified, and UL-listed for installation over a tub or shower on a GFCI circuit
  • Included Parts:Exhaust Fan Housing,Blower (motor),Grill,SNAP-IN Mounting Bracket,Damper and Duct Collar,User manual
  • 0.5 A
  • Size: 90 CFM.White, polymeric grill measures 10" x 10", with durable high-impact plastic housing for quiet operation and enhanced performance
  • Operates at 90 CFM at 2.5 scones
  • Features a special snap-in installation system for easy in-ceiling installation
  • Comes with 4" plastic duct collar with back draft damper for quiet operation and draft protection
  • Can handle continuous operation, is rated for ceilings insulated to R-40, Culus-listed, HVI 2100-certified, and UL-listed for installation over a tub or shower on a GFCI circuit
  • Included Parts:Exhaust Fan Housing,Blower (motor),Grill,SNAP-IN Mounting Bracket,Damper and Duct Collar,User manual
  • 0.5 A

Similar Products

Dundas Jafine FD420ZW Flexible White Vinyl Duct, 4-Inches by 20-Feet, 4Deflecto Duct Plastic Increaser and Reducer, 4Air King AS54 Advantage Exhaust Bath Fan with 50-CFM at 3.0-Sones, White FinishHG POWER 4 Inch Round Air Vent ABS Louver Grille Cover White Soffit Vent with Built-in Fly Screen Mesh for Bathroom Office Kitchen VentilationPack of 10pcs of 1/4 Turn Angle Stop Valve 3/8Broan 678 Ventilation Fan and Light Combination, 50 CFM and 2.5-SonesKES SUS 304 Stainless Steel Shower Floor Drain with Removable Cover 11.8-Inch Long Brushed Finish, V220S30