Lisle 51900 Spot Weld Chisel, One Size, Factory;
Lisle 51900 Spot Weld Chisel, One Size, Factory

Use to separate panels after the spot weld has been drilled out. Drive the blade with a hammer from the end or the side through the panel seam. Panels are separated without damage. The blade is sharpened on three sides and o...

Buy Now From Amazon

Use to separate panels after the spot weld has been drilled out. Drive the blade with a hammer from the end or the side through the panel seam. Panels are separated without damage. The blade is sharpened on three sides and offset for clearance. The sharpened edges will wear with use. Re-sharpen on a grinding wheel.

  • Separates Spot Welded Panels.
  • Use to separate panels after the spot weld has been drilled out.
  • Drive the blade with a hammer from the end or the side through the panel seam.
  • Panels are separated without damage.
  • The blade is sharpened on three sides, and offset for clearance.
  • NOTE: The sharpened edges will wear with use. Resharpen on a grinding wheel.
  • Separates Spot Welded Panels.
  • Use to separate panels after the spot weld has been drilled out.
  • Drive the blade with a hammer from the end or the side through the panel seam.
  • Panels are separated without damage.
  • The blade is sharpened on three sides, and offset for clearance.
  • NOTE: The sharpened edges will wear with use. Resharpen on a grinding wheel.

Similar Products

Blair 11096 Cutter SetSteck 20015 Seam BusterSteck Manufacturing 20016 Right Angle Seam BusterACDelco 10-2013 Body Joint and Seam Filler Compound - 10.1 ozSpot Weld Cutter Kit, 9 Piece Sheet Metal Hole Cutter Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit ToolsTruePower Welders Helper 3X3 Set Flat/Curve/Angle Cop PlatesDurston Manufacturing Co MPWT Magnetic Plug Weld ToolClean Sheets Superior Mixing Pad (12x12) - 100 Disposable Sheets For Toughest Job