10210 Cap. Wt.: 1lb (part# 10210) This item features: -When cast over models, steel-filled liquid epoxy provides accurate detail reproduction in the making of holding fixtures, light-gauge forming dies, and molds. -Hardens in about an hour. -Low viscosity and high compressive strength. -Can be machined to close tolerances. -Ideal leveling compound for machinery and equipment. -45-minute working time. -Color: Dark Grey. -Compressive Strength: 10200 psi. -Viscosity: 20000.0 cP. -Hardness: 85.0 Shore D. -Temp. Range: 250.0 F [Max]. -Full Cure Time @ Temp.: 16 h @ 75 F. -Chemical Compound: Epoxy. -Dielectric Strength: 30.0 V/mil. -Applications: Multi-Purpose. -Applicable Materials: Most Metals. -Resistance: Chlorinated Solvents, Hydrochloric Acid-10pct, Kerosene, Leaded Petrol, Propylene Glycol, Water, Mineral Spirits, Sodium Hydroxide, Ammonia. -Price is for 1 Each. Testing and approvals: -Chemical resistance was tested by immersion for 30 days at 75 F, after 7 days room temperature cure. -Qualifies under Mil Spec MMM-A-1754. Material safety data sheets and specs: PLASTIC STEEL LIQUID (B) (DS).pdf PLASTIC STEEL LIQUID (B) (MSDS).pdf
10210 Cap. Wt.: 1lb (part# 10210) This item features: -When cast over models, steel-filled liquid epoxy provides accurate detail reproduction in the making of holding fixtures, light-gauge forming dies, and molds. -Hardens i...
Similar Products
