48 inch x 50', standard edge double bubble foil both sides reflective insulation, 5/16 inch thick with two outer layers of aluminum foil, each foil layer is bonded to a tough layer of polyethylene for strength, reflects up to 97% of radiant heat, R-value up to 14.3 depending upon application, excellent vapor barrier for below grade, can be used for crawl space, duct insulation, side walls, metal buildings, basement walls & attics, product has been evaluated by icebox, boca, ccmc, sbc & Dade county, easy to install with tape & staples.
- A reflective insulation consisting of two outer layers of 96-percent reflective film, bonded to two layers of heavy gauge polyethylene bubbles (nominal thickness: 5/16-Inch)
- Heavy gauge polyethylene bubble interior provides superior strength and easy handling
- Available in a Standard Edge or Staple Tab Edge configuration
- Staple Tab Edge products are recommended when installing the insulation on 24-Inch or 16-Inch centers
- Easy to handle and install - no mess, no itchy fibers
- Only tools required are: staple gun, utility knife, tape measure and safety glasses
- A reflective insulation consisting of two outer layers of 96-percent reflective film, bonded to two layers of heavy gauge polyethylene bubbles (nominal thickness: 5/16-Inch)
- Heavy gauge polyethylene bubble interior provides superior strength and easy handling
- Available in a Standard Edge or Staple Tab Edge configuration
- Staple Tab Edge products are recommended when installing the insulation on 24-Inch or 16-Inch centers
- Easy to handle and install - no mess, no itchy fibers
- Only tools required are: staple gun, utility knife, tape measure and safety glasses
