Mallory 605 Unilite Ignition Module (Thermalclad)

If you are looking to upgrade your stock coil or want to complement the performance of your MSD 6-Series Ignitions, our blaster coils are the right choice. For MSD Ignition applications. With a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil. These blaster coils are supplied with a 0.8 ohm ballast resistor plus a terminal and boot to fit most applications. Mallory Melonite applications also require the ballast resistor.

MSD Red metal canister is filled with a premium grade oil for cooling
Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
100:1 turns ratio and lower primary resistance produce high voltage output
CARB E.O. Approved
Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
MSD Red metal canister is filled with a premium grade oil for cooling
Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
100:1 turns ratio and lower primary resistance produce high voltage output
CARB E.O. Approved
Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)

Top WaffleMaker Reviews

MSD 8203 Ignition Coil Blaster 2 Series (w/ballast resistor), Red, stock style ignition;